Saturday, December 24, 2011

Tuesday, October 12, 2010

Installing a Geberit 111.335.00.5 In Wall Carrier

Installation of the Geberit 111.335.00.5 In-Wall carrier starts with bolting the in-wall carrier to the floor, placing it within the studwork, and then bolting it to studs - just four connections!

Geberit 111.335.00.5 In Wall Carriers have been tested to withstand a maximum load of 880 lbs. In addition, the actuators plates are removable for maintenance access to the concealed tank and flushing mechanism.

Tuesday, September 7, 2010

Geberit 111.335.00.5 In-Wall Carrier System 111335005

Geberit 111.335.00.5 In-Wall Carrier System
Geberit North America markets concealed installation systems for residential wall-hung toilets

Installation of the In-Wall carrier involves bolting the carrier to the floor, placing it within the studwork, and then bolting it to studs - only four connections in all. Toilet carriers have been tested to withstand a maximum load of 880 lbs. In addition, the actuators plates are removable for maintenance access to the concealed tank and flushing mechanism.




Frames come complete with all the necessary parts to the wall and floor and to make the plumbing and drainage connections.

111.335.00.5

Features & Specifications



Duofix carrier installation frame for wall-hung washdown WC with UP320 concealed dual-flush tank, height 44 in (112 cm).


For installation of UP320 concealed flush tanks for wall-hung washdown WC


For installation in wood or steel stud walls that provide support equal to 2"x 6" (5.5") depth


For dual flush


For room wall or preWall construction covered with panels (gypsum or wood)


For installation in front of a solid or drywall


For installation in room-height preWall or partition wall


For a floor construction of 0 - 4 in (0 - 10 cm)


For 2-hole wall-hung washdown WC with fastening distance 7.1 in (18 cm) or 9.1 in (23 cm)


For WC with dual flush low-consumption flushing volume of 1.6 / 0.8 GPF (6 / 3 LPF)


For WC seated heights of 15" to 19"


Supports up to 880 lbs (400 kg)


Water supply connection at centre back or at the top


Concealed cistern for tool-free mounting and repair work


Self-locking feet for tool-free alignment of the element


Feet galvanized, infinitely adjustable 0 - 4 in (0 - 10 cm)


Concealed cistern fully insulated against condensation


Fill valve flow rate at 7 psi (0.5 bar): 1.1 gpm (0.07 l/s)


Fill valve flow rate at 43 psi (3 bar): 3.0 gpm (0.19 l/s)


Flush volume: 1.6/0.8 GPF (6/3 LPF)


Fill valve operating pressure range: 1 - 145 psi (0.1 - 10 bar)


Fill valve max. fluid temp: 77 °F (25 °C)


Tank and frame, water supply and drainage elbow


2 threaded rods M12 for ceramics fastening


Impuls380 fill valve


Fastening material
 
 

for use with the following designer brands

     



(877) 579-7969